Welcome to MODSonline

For this tutorial we will look at the basic techniques of outdoor lighting, we have already used the easy way, but this is far from satisfactory. Much more natural lighting and shadows can be achieved by just making a few simple changes.

1. First of all delete the light in the middle of the courtyard.

2. Now select all of the sky brushes, and bring up the surface inspector (S), check the light box , and put "50" in the "Value" box on the left. The actual value here isn't important, but 50 is a good safe amount. Make sure you don't accidentally change the texture, to be safe click on the sky texture first.

There are 5 main keys we need to set up before we do lets run through them. The first value is "_sun_light", which is basically the brightness of the sun. This will typically be in the low hundreds. Figure 1 shows two different values.

Figure 1. on the left the _sun_light value is 100, on the right it is 400

The next key is "_sun_angle", which sets the direction from which the sun shines. It has 2 values yaw & pitch. Yaw works exactly the same as the direction buttons at the bottom of the entity window. 0/360 is East, 90 is North, 180 is West and 270 is South, all looking from the top view. Pitch is the up/down angle from -90 straight down to 90 straight up. See Figure 2.

Figure 2. Left is a value of 315 -45 and right is a value of 270 -45

The next key is "_sun_color", which is, as you might have guessed the sun color, and takes the form of a RGB value, the same as the light entity. If there is no color the color of the sky texture will be used. NOTE this does not mean the compiled sky texture it means the one you see in SofRadiant, which is why there are 2 colored sky textures. See Figure 3.

Figure 3. Left is yellow (1.00000 1.00000 0.00000) Right is no _sky_color key at all.