i need the tool that dont allow people to shoot tru walls. what do i use for this? is it nosight metal clip ..or something else? i tryed clip weap and regular clip, that didnt work

heluuuup

So "Clip Weapon" didn't Clip Weapon???

Very odd indeed.

Clip and clip weapon is what I used on my maps exterior walls and it worked. I made a clip brush inside of my wall so the bullet impacts and marks were still there.

just use the good - old chaulk =D only if clip weap don't work

ukdjaj

you sure weapon clip should do the trick? maby i did something wrong, i just copy the walls and put them on same spot with the weapon clip texture right ?

caulk didnt work either, i just copied the wall and applied caulk textuere and place it over the same wall again, it had no effect at all :/ i dont know what to do now

if it actualy works how do i apply it? or how do i apply weapon clip in a good way, i just copy walls paste them on same spot with texture on it, aparntly that aint work

Lets test this.

Make a "Caulk" wall from scratch about 128 x 128 and place it 8 units in front of your textured wall. Make sure it's not touching your wall or the ground.

Now make a 128 x 128 "Weap Clip" wall from scratch and place that right next to the "Caulk" wall without touching your wall or the "Caulk" wall.

Make a "Full Clip" one in the same manner.

If you want, place small markers on the ground in front of each test wall using small textured blocks ( 8x8 ) so you know where they are after you compile. (not touching the walls)

Save/Compile/ go to those spots and try and shoot your wall.
The bullets should hit the "Invisible Walls" and not make marks on your textured wall.

If this works then just make you bullet blocking brushes from scratch instead of copying your walls and re-texturing them.
--------------------------------------------------------------------------------------------------
Another thing you could try:
Select your "Blocking wall" in the 2d window, right click and choose "Make Weapon Clip".

ok tested it with caulk, i made a second small wall infront of others, but when i compile some textured walls are glitched, like parts are invisible, guess i try weapon clip now

ok i got it to work with weap clip :)