the trees are not "linked", you dont have to move them unless they are sticking through the floor

the pointfile command draws a line to where the leak is...

follow the red line and try to visually inspect your map to see if you can find the leak

a leak can be:
1) brushes not closing off completely, leaviing an opening into the "void"

2) a brush or model sticking through the outermost wall of your map (be it a skybox or a floor/ceiling)

3) something else i forgot hehe

pointfile draws a line from an entity (the one that q3map was sompiling when it found the leak) to the void

if that is as long as the line is - i would have to assume one of 2 things:

1) you dont have a bottom on your skybox

or

2) you have an entity, brush, or patch touching or protruding through your skybox

Only i understand...

In CODRadiant is real necessary have a top and bottom skybox (in MOHAA i dont put the bottom skybox, per default) ???

And, thanks for your replys

i would make a skybox that is big enough to surround the whole map without touching it...

if you make sure nothing is touching your skybox, and it is not leaking, you should not have that problem anymore

Read the skybox tutorial!

Well,

I write this reply only to thanks to explanation and help for i understand the leak problem.

I see my real problem...


And "kill" he