I have a small problem. From my SOF2 server I'm able to pull a list of SOF2 servers, no problems. However, all other PC's on LAN cannot?!?!?! They can see my own server in "Local", but get a blank page from "Internet"  All PC's can brouse internet, get email, connect to LAN recources etc - just no list in SOF2 !?!? Any idea's, I'm missing something silly here, i can feel it....

I have a dedicated server running on my LAN (using Runner). I also have Roger Wilco Base Station on the same machine, a Windows 2000 Server. I am connected to the Internet using an ADSL link, and an ASUS modem/router running NAT. All required ports forwarded to server. This server is also running DNS.

Thanks....

is each client using a different port?

Aha, that'll be what it is. How do I set which port the client will use in SOF2 or do I only need to open said port number in NAT? And what port range can I use?

Thanks very much for any help...

add
+set net_port #
to the shortcut target, where # is the port number.

default port is 20100, so generaly people use 20101, 20102 and so on

u should not need to open any ports on the nat unless u are runnign a server. if u still have problems forwarding the ports to the computers may help, but it should not normaly be necacerry.

Absolutely   --SPOT ON--  

Thanks for spotting that, just what the doctor ordered.