Did you go to [url=http://[url=www.portforward.com]www.portforward.com][url=www.portforward.com]www.portforward.com and see if they had any information to to with your router?

ok i have bt voyager 1500 and i've set to hold ports 10100 throught to 10112 UDP and i still cant get my dedicated server into the server list but it works fine when no router connected. any help wood b greatly appreciated as my flatmate will literally kill me next time he has to reconnect the router lol.::::
i created the rule by: manual create: udp: wan - 20100->20112: lan - 20100->20112, and i selected my machine from the connected devices list

HELP lol:(

i forgot to say its sof II

cheers

Can you select those ports to forward over TCP as well, and not just UDP?

Yeah ive tried putting a rule in for TCP as well an with even both of them active it doesn't make any difference. its almost like the router lets the info go out to ravensoft then won't let anyone connected t the master see my server. i read something somewhere about port triggering...will i needm to do that for them to work properly...if so, how do u achieve this?

Are you sure you don't have any other firewall software running that would be blocking the incoming requests?

yeah but its all on my own pc an as i say if i connect directly to the modem i have no problem with the connection...i can host for hours an hours
Only prob is i cant hog the connection cos my flat mate will actually kick my hed in lol...well not quite but it does annoy the poor boy

Any one know how I would setup SOF2 on D-Link 4300.  I can't figure out what these GameFuel setting should be?

Router Firmware version 1.6


GAMEFUEL SETUP
Automatic Classifaction = check box or not to?
Dynamic Fragmentation = check box or not to?

Automatic Uplink Speed - if checked
Measured Uplink Speed = Not estimated kbps

Automatic Uplink Speed = if not checked in box
Uplink Speed: = Select Transmission Rate from 128 to 2048 kbps to choose from.

Connection Type: For me Cable


ADD GAMEFUEL RULE
Enable = check it...good!
Name = SOF2......I'm good here too!
Priority = 0....255 is the lowest priority...so I want 0!
Protocol = Select from Any, ICMP, TCP & UDP?
Source IP Range: don't know what to put....to IP Range?
Source Port Range: don't know what to put...to Port Range?
Destination IP Range: again don't know......to IP Range?
Destination Port Range: got me help..........to Port Range?

Quote (PaleFace @ Feb. 08 2006, 12:19 pm)

Any one know how I would setup SOF2 on D-Link 4300. [cut some] Protocol = Select from Any, ICMP, TCP & UDP? Source IP Range: don't know what to put....to IP Range? Source Port Range: don't know what to put...to Port Range? Destination IP Range: again don't know......to IP Range? Destination Port Range: got me help..........to Port Range?

I dont know your router, but i think it works like this (not sure doh):

Protocol: TCP & UDP
Source IP and Port: IP and port of your SOF2 server (LAN ip)
Destination IP and Port: your internet IP and port of server?