Hi, im creating a map, and i want to make a couple of crates leaning on something like say a table, so i need to rotate it 45 degrees. any help?

ty in advance.

Select the model(crate(s)), press "N" at the left down corner click 45, that is 45º to rotate to others just click in the 135 or 90 or 45 or 180 or 360 or 225 or 270 or 315º

No i meant the other way.



Look at the image. the one on the right is what ive got now and the one on the left is the one what i want it as...

Thanks in advance.

Only change the view in 2D vision and then rotate it (XY Top, XZ Front, YZ Side... Ctrl+TAB)

highlight the crate then just press the two arrows together up on the gradiant toolbar and just then hold down mouse and it will move ,in the 2d window u may have to change the view depending on the angle.either way u will have to fiddle about mate

Select the crate then go to "Selection/Rotate" The bottom selection in the drop down will bring up a window with x,y,z, input windows. Just tick off the one that moves the crate in the desired direction and hit enter. The actual view is not quite the same as the entered result so you will probably have to tweak it some. You can then move the selection up and down in and out to position it in your map. Hope this helps. Alt