ok i have made a creek in my map leading to a wall with slits in it to let water out other side.
my creek is about knee deep to the player i guess.
the wall is 32 units thick... i have a waterfalls it works :)
but when I look for other the side i can see my creek through the wall ? Im also able to see my trees i have up on the bank an or other walls buildings so on,, just past the waterfall an wall its running through ): not good ok i can see the waterfalls being Transparent but not everything else lol.

my terrain is 15 x 15 in density :) so u know...
my waterfalls is touching the wall itself.
I look up from other side of the falls an I see the world like I mean I can see my skybox but i need to have my skybox big like that because im going to make a tunnel underground .

anyways i might try bring up my skybox more away from the creekbed itsslf might help but i dont see why im able to see through the wall its thick enough this i know
anyways any help will be cool
Keep up the good work guys my map is coming along fine but its allways something that slows me down lol...

MrSniper

Can you post an image of what you mean, im finding it difficult to understand the problem!

i'd love to post a image here but dont know how lol.
I redid the whole thing. I took a snapshot of my error saved it in .jpeg so its small pic but, dont know how to post pics here...

... Well what is going wrong I can see past the waterfalls an see the upper level of my world through the ground & the wall the crek is running through !!
I understand seeing past waterfalls but not able to see into the creek above when there is a wall there hope u get it now...
an how do i post pic here u cant only from a webpage ??

Note: I did ctrl-shift on the top part of my creek using fastwater I did ctrl-shift an put a No-Draw on the sides of the falls but left the top normal.

If that helps any lol :)
my e-mail is Bling-Rulez@hotmail.com to get my pic I guess try e-mailing me ok tnx cause theres no were to post a pic on this site lol

MrSniper

im back lol I should of just gave u my X-Fire name...
if u use x-fire would be easier to help me :) that way we can talk a bit an I could send my error pic to u direct from x-fire:)

X-Fire name: = "MrSniper" try that ok if u have x-fire this will be cool with me I'll add u right away!!.

MrSniper

im back lol I should of just gave u my X-Fire name...
if u use x-fire would be easier to help me :) that way we can talk a bit an I could send my error pic to u direct from x-fire:)

X-Fire name: = "MrSniper" try that ok if u have x-fire this will be cool with me I'll add u right away!!.

MrSniper

-stop-

stop ??? are u saying stop for lol ? ever.

Well sorry to post again an tell u all im still getting same error but i am my bad lol.

I did have it right but changed something an now it went back to errors!! grrrr...

What seems to be happening is this.
I make water in a creek I use the default ...water tecture...
lay out my creek an do... ctrl-shift an apply fastwater to the top part like it says in the tut.
Then I have my small wall or dam the walls are 32 units thick.
I cut out a part in the wall/dam for water poor out into a basin below. Right next to the creek water I put a waterfalls.
I do the same as I did with the creek water but apply a "waterfalling" tecture. I ctrl-shift both sides an apply a No-Draw, I leave the top on touched. an below that I have small basin with trees,,, an terrian an some bumpy parts out of water. I make sure my waterfalls is touching the water below but not gong under it :)

My Error is this... I can see past the wall/dam Brush itself into my world above this is not good. I should not be able to see up into my creek bed or other stuff plz help, I'd send a pick but this website u cant do that lol

MrSniper

Upload a screenshot to imageshack, and use the "link" or "image" BBCode to post it here (preferably the link one!)

tnx man will do that right now. I have a good screen shot yes ok brb going to do that :) Your da man CareTaker :)

MrSniper