Hey guys. I have a dilemma. There are 3 buttons, and I want to make it so that when all 3 of them are pressed, one output value is fired. Is there an entity that can put 3 values into one? Thanks.

Use 3 logic_relay (for each button 1)
set Start Disabled on Yes
when a button is pushed enable the logic_relay for that button
set the onTrigger output of the first logic_relay so that it triggers the second
set the onTrigger output of the second logic_relay so that it triggers the thirt
set the onTrigger output of the thirth logic_relay so that it will trigger the action which should happen if all 3 buttons are pushed
add an output to the three buttons so that the first logic_relay is triggered (set a delay of 0.01 so the logic_relay which belongs to the button is activated first)

Thanks, I sort of get what you are saying. But if you make each logic_relay trigger the next, then you will only have to press one button to trigger them all, right? Im confused.

only activated logic_relay's are triggered, you have to press all 3 buttons to activate all logic_relay's

Oh ok. And what do you mean by adding a delay of 0.01 seconds to the first one?

To make sure the logic_relay is activated before triggering the first logic_relay. otherwise the trigger could still be deactivated when you test if all 3 buttons are pushed

Thanks I got it to work!